Download DatasheetRequest Quote

Overview

The P8012 can be configured with up to 3 IO cards. This enables it to support up to 24 high speed analog inputs plus two digital tachos. Alternatively, cards can be combined to provide support for various input options. These include high speed analogthermocouplestrain gaugeprecision tachometer measurement, CAN-busGPS and analog output.

Units can be stacked to expand the system up to 96 channels. Each option is complete with programmable signal conditioning, which is controlled by the DATS software.

Click here or on the button below to discover more about the available P8000 channel options.

P8000 Input/Output Options

Specification

System
Analog inputs up to 24 channels plus tachos
Expansion Flexible packaging options
Split rate sampling Multiple sampling rates can run concurrently on separate cards
Programmability All features under software control
Communications USB 2.0
Environmental
Shock and vibration Suitable for mobile use (7g rms)
Operating temperature 0°C to +40°C (32°F to +104°F)
Humidity 80% RH, non-condensing
Weight Dependent on configuration, channel count & chassis
General
Supply voltage Choice of 10-36V DC (e.g. vehicle battery) or AC mains (adapter supplied)
Dimensions† (H x W x D) 50mm x 290mm x 270mm
2” x 11.4” x 9.4”

Features

  • tough, compact & rugged
  • 24-bit accuracy
  • Up to 400k samples/sec/channel
  • dynamic range: 105dB
  • noise floor: -120dB
  • BNC or Lemo connectors
  • full signal conditioning
  • voltage or ICP input
  • programmable amplifiers
  • anti-alias filters
  • transducer power

Download

Download datasheet

Related Case Studies

  • Noise From The Underground – Case Study

    The customer needs to check whether noise and vibration from an underground train line is going to cause a nuisance in a new multi- storey housing block. A sophisticated triaxial accelrometer is connected to a Prosig P8000, which is used to capture the data.

    Read more
  • Vibrating Robots – Case Study

    A Prosig P8012 system is used to simultaneously capture CAN-bus data and vibration signals on an industrial robot. The robot is controlled by a CAN-bus and the Prosig P8000 measures the relationship between sending commands to the robot and seeing the vibration effects caused by the displacement of the hydraulics.

    Read more
  • End Of Line Testing – Case Study

    The modern design process is usually built around improving the quality of the product. One major automobile manufacturer uses Prosig P8000 & DATS to test vehicles hot off of the production line.

    Read more

Related products